Bayou Geeks Gear

Give your UniFi gateway a dedicated place in your rack. Mount your UniFi Cloud Gateway Ultra or Cloud Gateway Max in a standard 19-inch rack with this 3D printed PETG mount. The 1U design keeps the gateway’s status display facing forward and its Ethernet and power connections at the rear. Choose the Standard configuration for a clean front panel, or add the 4-Port Front Patch Kit to bring four Ethernet connections to the front of your rack. Available in black or white. Rack mounting hardware and mount assembly hardware are included. Choose your configuration Standard Includes solid left and right side sections for a simple front panel. Connect your Ethernet cables directly to the gateway at the rear. With 4-Port Front Patch Kit Includes a solid left section and a four-position patch section on the right, viewed from the front. The kit includes four RJ45 keystone couplers and four short Ethernet patch cables. Connect the gateway’s rear Ethernet ports to the couplers to make those connections accessible from the front of your rack. The kit relocates four existing Ethernet connections. It does not add network ports or switching capacity. What’s included — Standard One printed gateway cradle. Two solid side sections. Two rear retaining stops. M3 assembly screws and nuts. Rack mounting nuts and bolts. What’s included — With 4-Port Front Patch Kit One printed gateway cradle. One solid left section. One four-position right patch section. Two rear retaining stops. Four RJ45 keystone couplers. Four 1.5 ft. CAT6 Ethernet patch cables. M3 assembly screws and nuts. Rack mounting nuts and bolts. The kit’s patch section replaces the Standard configuration’s solid right section. Assemble the mount using the included M3 hardware. Install the gateway with its display facing forward and its connections facing the rear, then fit the rear retaining stops. For the Front Patch Kit configuration, install the keystone couplers and connect the supplied patch cables between the gateway and the couplers. Support the assembly while securing it to the rack at all four mounting points. Confirm the supplied rack hardware suits your rack rails, and avoid overtightening fasteners against printed parts. Finish and care Visible layer lines and minor surface variations are normal characteristics of 3D printing. The modular design has visible joints between its sections. Intended for indoor use. Clean with a soft, dry cloth. Color may vary slightly from screen images. Please note Gateway, power supply, rack, and external network cables are not included. The four short internal patch cables are included only with the Front Patch Kit configuration. This is a physical product; digital STL files are not included. Independently made accessory. Not manufactured, sponsored, or endorsed by Ubiquiti.

Give your UniFi gateway a dedicated home. Free up desk and shelf space with a PETG wall mount designed for the UniFi Cloud Gateway Ultra and Cloud Gateway Max. The vertical cradle positions the gateway with its Ethernet and power connections facing downward for organized cable routing. Choose black or white to complement your home office, network area, or equipment backboard. Features 3D printed in PETG. Designed for UniFi Cloud Gateway Ultra and Cloud Gateway Max. Vertical mounting frees up desk and shelf space. Downward-facing connections help keep cables organized. Open-center cradle with side guides and lower supports. Four screw mounting points. Side slots for an optional narrow retaining strap. Available in black or white. Compatible models UniFi Cloud Gateway Ultra — UCG-Ultra UniFi Cloud Gateway Max — UCG-Max Check your device’s model number before ordering. Compatibility with other models is not specified. What’s included One PETG wall mount in your selected color. Four drywall anchors. Gateway, power supply, cables, and optional retaining strap are not included. Installation Attach the mount using screws and anchors suitable for your mounting surface. Use the included drywall anchors only where appropriate for your wall. Slide the gateway into the cradle from above with its connections pointing downward. Allow clearance above the mount for device removal and below it for connectors and cable bends. Avoid overtightening mounting screws against the printed bracket. Finish and care Each mount is 3D printed. Visible layer lines and minor surface variations are normal. Color may vary slightly from screen images. Intended for indoor use. Clean with a soft, dry cloth. Please note This listing is for a physical mount. The gateway and digital STL files are not included. Independently made accessory. Not manufactured, sponsored, or endorsed by Ubiquiti.